Publications:[1] S. Koutsonas, H. Haroglu, Computational Optimization of voids formation on 3D woven Composites Truss Structures during Infusion, Springer Nature, Book: Intelligent Computing, Chapter No:18, DOI:10.1007/978-3-030-80119-9_18.[2] S. Koutsonas, H. Haroglu, Computational Optimization of voids formation on 3D woven Composites Truss Structures, paper 206, SAI Computing Conference, 15-16 July 2021 London UK by IEEE supported.[3] S. Koutsonas "Modelling race-tracking variability of resin rich zones on 90º composite 2.2 Twill fibre curved plate" Composites Science and Technology: manuscript CSTE_2018_979. Accepted 1st Aug. 2018. https://doi.org/10.1016/j.compscitech.2018.08.001 (CiteScore 6.63).[4] S. Koutsonas "Electrical conductivity of degraded polyacrylonitrile powder by microwave irradiation for supercapacitor devices or other mobile applications" Materials Letters Volume 193, 15 April 2017, Pages 203–205. http://dx.doi.org/10.1016/j.matlet.2017.02.001. https://authors.elsevier.com/a/1UWnh,3psroNf5 No. MLBLUE-D-16-06371R3. (CiteScore 3.31).[5] S. Koutsonas "Compaction and bending variability measurements of a novel geometry 3D woven layer to layer interlock composite textile around a 90° curve plate 3.2 mm radius'' Composites Communications Volume 5, September 2017, Pages 40–45. http://dx.doi.org/10.1016/j.coco.2017.06.004. (CiteScore 3.02).[6] S. Koutsonas, G. Mitchell, F. Davis (2018). Microwave treatment of polyacrylonitrile powder method development and effects of surface modification porosity for supercapacitor devices or other mobile applications, Applied Mechanics and Materials, volume (890) ISSN: 1662-7482 2019 Trans Tech Publications, Switzerland. Doi: 10.4028/www.scientific.net/AMM.890.146 (SJR: 408/518 Engineering (Q4)).[7] A. Edruweit, F. Gommer, J. Hutchinson, S. Koutsonas, A. C. Long, P. Schubel, X. Xiao, X. Zeng "Resin flow simulation based on advanced reinforcement geometry modelling from yarn-scale to component scale" Proceedings of the FPCM11 Conference Auckland 9-12 July 2012.[8] S. Koutsonas. "Modelling race-tracking variability of resin-rich zones on 90º <Degree> composite 2.2 Twill fibre curve plate". Manuscript 400, IEEE supported Computing Conference 10-12 July 2018. London UK.[9] S. Koutsonas "Polyacrylonitrile degradation by microwave irradiation a Fourier Transform Infrared Spectroscopy analysis for the manufacturing of high porosity area for electrochemical supercapacitors or other devices for mobile applications". University of Cambridge Materials Summit 4th to 6th of January 2018. Manuscript number: UKSUMMIT-4404.[10] S. Koutsonas, G. R. Mitchell, F. J. Davis "Microwave treatment of polyacrylonitrile powder method development and effects of surface modification porosity for supercapacitor devices or other mobile applications" The 2nd International Conference on Direct Digital Manufacturing and Polymers. Centre for Rapid and Sustainable Product Development, Institute Polytechnic of Leiria Rua de Portugal, 2430-028 Marinha Grande, Portugal 15th to 18th of May 2017.[11] S. Koutsonas FE Modelling "Variability and race-tracking in Advanced Composites Truss Structures". Thesis 2015 The University of Nottingham.Book, Springer Nature Chapter 53 proceedings:[12] S. Koutsonas "Modeling Race-Tracking Variability of Resin Rich Zones on 90 º <Degree>; Composite 2.2 Twill Fibre Curve Plate" SAI 2018, AISC 858, approval 4723127_1_En, Chapter 53, Springer Nature ISBN 978-3-030-01173.
Areas of specialism
- Design and Manufacturing
- Polymers and Composites
- FEA/CFD simulations modeling
- Materials modelling, Supercapacitors devices, Batteries, Fuel Cells
- Semiconductor devices, Electromagnetic waves and irradiation
Research student supervision
Main supervision
Other supervision
Social media